This app allows interfacing with the AirPort, which is helpful. Manage DHCP reservations and port mappings.Easily access network information such as IP address, DNS servers, and router address.View or update passwords for your network, base stations, or disks.Restart or restore a base station, or update the firmware on a base station when available.View and change network and Wi-Fi settings.Get information about your connected Wi-Fi devices.See a graphical overview of your Wi-Fi network.Change base station and network settings, or manage advanced features such as security modes, wireless channels, IPv6 configuration, and more.ĪirPort Utility works with all Apple 802.11n and 802.11ac Wi-Fi base stations, including AirPort Express, AirPort Extreme, and AirPort Time Capsule. See a graphical overview of your Wi-Fi network and devices. ** a possible exception being when the connected device in question drops off the network (say from having lost power, or resetting after a firmware update) and the router still lists it as assigned in which case, a simple restart of the router will correct.Use AirPort Utility to manage your Wi-Fi network and AirPort base stations, including AirPort Express, AirPort Extreme, and AirPort Time Capsule - right from your iPad, iPhone, or iPod touch. 200 (go with the highest number, or pick one in the middle). *TalkTalk appear to use 192.168.1.1 as their default router address, therefore it would be typical for the IP address range of connected devices to be from 192.168.1.10 through 192.168.1.100 or. The next level being to look into the possibility of reserving an IP address for a particular device from within the router's UI (as per Audio above). This may or may not solve the problem, but it is a logical first configuration step (after having restarted and/or reset/reconfigured AE to join the network). This will cause a DHCP set router to allow the device to use that address as long as it is a) within the routers set DHCP IP address range, and b) isn't already in use (which it won't be if no other devices are self-set to that same address**). IOWs, use AirPort Utility to set AE to 'Fixed IP' (via 'Network') and then enter 192.168.1.100 (for example*). the default firmware that comes with the manufacturer's own direct offerings.Īs such, often, assigning fixed IP addresses for a given device need be entered on the device itself, rather than via the router's UI. With many internet service provider supplied routers the customized UI is somewhat limited vs. Talk Talk support should help you get into the Router and get the Static IP part doneĪsk them what Wi-Fi you are running - both 2.4 and 5 or just 2.4 or just 5 - it'll help down the line if you are still having problems Short story a Static IP removes some things that can screw stuff up for youĭo the Factory Reset again, twice to be sure, do the Static IP then try again with the App on a PC/Mac if possible - easier to troubleshoot. On the back of the Airport there will be a MAC Address - you may need to note that so you can find it in the Router - 6 pairs of numbers/letter - it'll look something like "0A-14-2B-01-23-45" or "00-A4-22-B1-23-45" Once into the Router there are menus - in the Network one find the Apple Airport Express and tell the Router to always give it the same IP Number it has now - that is called assigning a Static IP aka Fixed IP - each device has a hidden identifier called a MAC Address - think of it like a car number plate - the Router sees the identifier and says right you have to have the same IP as last time, here you go. Using a computer as if you are look at the Internet you can manage a Router - they have a website address either a number or a name - commonly TalkTalk use 192.168.1.1 - a webpage asking for Username/Password should appear - usually that is Admin/Admin or Admin/Password or printed under the Router or in a Letter you received day 1.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |